Description

The Latest FW updated 201708:

• Improve RF performance and add CRC check mechanism
• Supported Sleep mode, capable to provide real low power mode for Green Power application.
• Supported WakeUP from LoRa feature.

Features:

1.  Made in Taiwan
2. Direct use of USB interface control, do not need to understand the complex transmission LORA concept.
3.  Can be directly connected with the Raspberry Pi quick practice ioT LoRa gateway, do not need expensive LoRaWan gateway
4.  iFroglab provides Raspberry USB driver and can receive more than one LoRa module multiplexing, the industry’s first.
5.  The actual test can reach 3km away, the rapid completion of iOT remote control!
6.  Ground floor, second floor of the launch information can be easily received on the sixth floor upstairs, you can directly replace the Zigbee and Zwave and other network technology!
7.  The transmission of information through the wall through the ground.
8.  To provide a complete raspberry and Arduino example of the program can be a simple data transmission and reception of the sample program https://github.com/iFrogLab/IL-LORA1272 and Sample program for LoRa gateway https://github.com/iFrogLab/LoRaGateway
9. Get started quickly

LoRa Enzo RS485/RS232

iFrogLab LoRa Enzo for industrial controller

iFrogLab  Lora 868/900/915 MHz SX1272 LoRa Enzo for industrial controller compatible

Features:

• LoRa industrial controller 
• Frequency Range: 868/900/915MHz
• Modulation: FSK/GFSK/MSK/LoRa
• High RX Sensitivity: -137dBm
• Output Power: +20dBm Data Rate: <300 kbps 127dB dynamic Range RSSI Excellent blocking immunity Preamble detection Automatic RF sense and CAD monitor Built-in bit synchronizer for clock recovery Packet engine up to 256 bytes with CRC
• Working Temperature: -40°C ~+80°C Build-in temperature sensor
• RS232
• RS485
• Supply voltage: DC 8 V -18V
• Has Complete sample code for such LoRa gateway https://github.com/iFrogLab/IL-LORA1272