WSG309S EVB   Introduction

This document describes how to use the SigFoxEvaluation Board (EVB), which is aguide-linefor engineers to develop and test LPWANmodules.

This document is applicable to LITE-ON WSG309SEVB KIT.

LITE-ON supplies LPWANEVB for designers to develop application based on LITE-ON SigFox module(LPWAN Module). Before you start usingit, here is something you need to prepare.

1. WSG309SEVB

2. USB Type A connectorfor power and data communication

3. Serial COM port Tool

4. PC or Notebook

Sigfox WSG309S_IPEX and WSG309S_RF_PAD

WSG309S RC 1/2/3/4/5/6 is a Sigfox +BT5.0 modem
module for the low power wide area network
(LPWAN) market. It is designed with STM’s system
S2-LP+BLUENRG248 MCU
The module was designed for high performance,
high quality, low cost, small form factor and most
importantly. The Sigfox application is running on
BLUENRG2 MCU at high efficiency executed at high
efficiency using its internal 32bit core Cortex-M0
processor.
Every module is preloaded with Sigfox application
software, module specific ID/KEY/PAC as referring to
Sigfox network system. The preloaded software also
includes a bootloader which allows the software update
or future user application development.WSG309S RC 1/2/3/4/5/6 is a Sigfox +BT5.0 modem
module for the low power wide area network
(LPWAN) market. It is designed with STM’s system
S2-LP+BLUENRG248 MCU
The module was designed for high performance,
high quality, low cost, small form factor and most
importantly. The Sigfox application is running on
BLUENRG2 MCU at high efficiency executed at high
efficiency using its internal 32bit core Cortex-M0
processor.
Every module is preloaded with Sigfox application
software, module specific ID/KEY/PAC as referring to
Sigfox network system. The preloaded software also
includes a bootloader which allows software update
or future user application development.