\n[php]<\/p>\n
\/*
\n* Pin 10 -> RX
\n* Pin 11 -> TX
\n*\/
\n#include<\/p>\n
#define LEDPIN 9<\/p>\n
iFrogLabLoRaLibrary LoRa(10,11,9); \/\/ RX, TX, DataReady
\n\/\/byte* data[20];
\nvoid setup() {
\nSerial.begin(9600);
\nwhile (!Serial) {
\n; \/\/ wait for serial port to connect. Needed for native USB port only
\n}
\nbyte* data=LoRa.GetChipIDAll();<\/p>\n
Serial.println(” “);
\nSerial.print(“\\nChip:”);
\nSerial.println(data[3],HEX);<\/p>\n
Serial.print(“FW_Ver:”);
\nSerial.println(data[4],HEX);<\/p>\n
Serial.print(“Unique number:”);
\nSerial.print(data[5],HEX);
\nSerial.print(data[6],HEX);
\nSerial.print(data[7],HEX);
\nSerial.print(data[8],HEX);<\/p>\n
Serial.println(“”);
\nSerial.println(“————————–“);
\nSerial.println(“”);
\nint ChipID=LoRa.GetChipID();
\nSerial.print(“ChipID:”);
\nSerial.print(ChipID);<\/p>\n
Serial.println(“”);
\nint firmwareVersion=LoRa.GetFirmwareVersion();
\nSerial.print(“Firmware VersionID:”);
\nSerial.print(firmwareVersion);<\/p>\n
Serial.println(“”);
\nint DeviceID=LoRa.GetDeviceID();
\nSerial.print(“DeviceID:”);
\nSerial.print(DeviceID);<\/p>\n
}<\/p>\n
void loop() {
\n}<\/p>\n
![\"screen-shot-2016-11-28-at-9-47-15-pm\"](\"http:\/\/www.ifroglab.com\/wp-content\/uploads\/2016\/11\/Screen-Shot-2016-11-28-at-9.47.15-PM-1024x502.png\")
<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"