- \n
- iFrogLab\u00a0online store<\/a><\/li>\n
- Amazon.com<\/a><\/li>\n
- \u9732\u5929<\/a><\/li>\n<\/ul>\n
Features:<\/h2>\n
- \n
- NB-IoT Support<\/li>\n
- B1, B3, B5, B8, B20, B28\u00a0 (Frequency table)\u00a0<\/a><\/li>\n
- AT Commands<\/li>\n
- Extended Temperature<\/li>\n
- Range: -40\u00b0C to +85\u00b0C<\/li>\n
- Ultra-Low Power<\/li>\n
- Consumption<\/li>\n<\/ul>\n
Difference:<\/h2>\n
The difference the iFrogLab NB-IOT WNB301H and WNB303R\u00a0module are that.<\/p>\n
#. WNB303R is able to adjust the frequency range by using the full frequency band of the joint MKT chip.<\/p>\n
#. WNB301H is used in the frequency range of only 698-960 MHz and 1695-2180 MHz using HiSilicon chips<\/p>\n
<\/h2>\n
Description:<\/h2>\n
Advanced Solutions WNB301H is high performance NB-IoT module with extremely low power consumption for long battery life up to 10 years. The ultra-low power design is applied at system level, in the different 3GPP modes of operation. WNB301H supports various interfaces such as UART, I2C, SPI* and so on. The module provides customer high flexibility for different kind of applications. Due to the compact form factor, ultra-low power consumption and good performance, WNB301H is the best choice to be embedded to the design or solution for SmartX applications, ex. smart cities, smart metering and grid, security and asset tracking, environmental monitoring and control, health care monitoring, etc.<\/p>\n
<\/p>\n
Document:<\/h2>\n
PDF download<\/a><\/p>\n
<\/p>\n
General Description:<\/h2>\n
WNB301H is equipped with 42-pin 1.25mm pitch Stamp Pad of LCC package for
\nPCB SMT mounting. The following chapters provide detailed descriptions of these
\npins:<\/p>\n- \n
- Power supply<\/li>\n
- Reset interface<\/li>\n
- UART interfaces<\/li>\n
- USIM interface<\/li>\n
- ADC interface<\/li>\n
- I2C interface*<\/li>\n
- Network status indication*<\/li>\n
- RF interface<\/li>\n
- GPIO \/ SPI Interface*<\/li>\n<\/ul>\n
Other Features<\/h2>\n
\n- \n
- Support firmware update via UART and FOTA<\/li>\n
- Support DRX\/eDRX\/PSM in the different 3GPP modes of operation<\/li>\n
- Integrated power management unit for direct-from-battery operation<\/li>\n<\/ul>\n
Interface<\/h2>\n
- \n
- UART | I2C | SPI* | USIM with 1.8V\/3V operation | ADC | GPIO<\/li>\n<\/ul>\n
\u00a0Protocol Stacks<\/h2>\n
- \n
- IPv4 | IPv6 | NON-IP | UDP | TCP | CoAP | DTLS | LWM2M<\/li>\n<\/ul>\n
Certifications<\/h2>\n
- \n
- CE* | FCC* | CCC | CTA* | GCF* | RoHS Compliant<\/li>\n<\/ul>\n
Package<\/h2>\n
- \n
- Low profile and Compact Form Factor: 23.0 x 15.0 x 2.2 mm\u00a0 \u00a0 \u00a0Weight: 1.45g<\/li>\n
- 42 Pin Stamp Pad of LCC package<\/li>\n<\/ul>\n<\/div>\n\n\n\n\n\n
Cloud Platform<\/h2>\n
- \n
- iForglab Dashboard<\/strong><\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
<\/p>\n
<\/p>\n
Pin Assignment:<\/h2>\n
![\"\"](\"http:\/\/www.ifroglab.com\/en\/wp-content\/uploads\/2018\/12\/Screen-Shot-2018-12-26-at-3.02.41-PM-1024x792.png\")
<\/p>\nMechanical Information<\/h2>\n
The following figure shows the package outline drawing of WNB301H.<\/p>\n
![\"\"](\"http:\/\/www.ifroglab.com\/en\/wp-content\/uploads\/2018\/12\/Screen-Shot-2018-12-26-at-3.06.47-PM-1024x725.png\")
<\/p>\nRecommended Land-pattern<\/h2>\n
The following figure shows the recommended land-pattern of WNB301H<\/p>\n
![\"\"](\"http:\/\/www.ifroglab.com\/en\/wp-content\/uploads\/2018\/12\/Screen-Shot-2018-12-26-at-3.07.12-PM-1024x892.png\")
<\/p>\n<\/p>\n
<\/p>\n
The iForglab has official to alliance with Taiwan telecom service\u00a0 and kick off this NBIOT business in 2019.<\/h3>\n
Far EasTone kicks off first NB-IoT deployment in Taiwan<\/a><\/p><\/blockquote>\n
- iForglab Dashboard<\/strong><\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
- CE* | FCC* | CCC | CTA* | GCF* | RoHS Compliant<\/li>\n<\/ul>\n
- IPv4 | IPv6 | NON-IP | UDP | TCP | CoAP | DTLS | LWM2M<\/li>\n<\/ul>\n
- UART | I2C | SPI* | USIM with 1.8V\/3V operation | ADC | GPIO<\/li>\n<\/ul>\n
- Amazon.com<\/a><\/li>\n